[CanJu]

Return-Path:
Received: from compute1.internal (compute1.nyi.internal [10.202.2.41])
by sloti1d2t14 (Cyrus 3.1.5-551-g079e021-fmstable-20181002v2) with LMTPA;
Fri, 12 Oct 2018 01:55:46 -0400
X-Cyrus-Session-Id: sloti1d2t14-3149061-1539323746-2-13644677477042061658
X-Sieve: CMU Sieve 3.0
X-Spam-known-sender: no
X-Spam-score: 1.3
X-Spam-hits: FREEMAIL_FROM 0.001, HTML_MESSAGE 0.001, RCVD_IN_DNSWL_NONE -0.0001,
RCVD_IN_MSPIKE_H2 -0.001, SPF_PASS -0.001, URI_HEX 1.313, LANGUAGES en,
BAYES_USED none, SA_VERSION 3.4.0
X-Spam-source: IP=’209.85.167.47′, Host=’mail-lf1-f47.google.com’, Country=’US’,
FromHeader=’com’, MailFrom=’com’
X-Spam-charsets: plain=’UTF-8′, html=’UTF-8′
X-Resolved-to: [email protected]
X-Delivered-to: [email protected]
X-Mail-from: [email protected]
Received: from mx5 ([10.202.2.204])
by compute1.internal (LMTPProxy); Fri, 12 Oct 2018 01:55:46 -0400
Received: from mx5.messagingengine.com (localhost [127.0.0.1])
by mailmx.nyi.internal (Postfix) with ESMTP id 84380C6584
for ; Fri, 12 Oct 2018 01:55:45 -0400 (EDT)
Received: from mx5.messagingengine.com (localhost [127.0.0.1])
by mx5.messagingengine.com (Authentication Milter) with ESMTP
id 07C6F5E3477;
Fri, 12 Oct 2018 01:55:45 -0400
ARC-Seal: i=1; a=rsa-sha256; cv=none; d=messagingengine.com; s=fm1; t=
1539323745; b=qCcsc+4U+xFLdUcp1jn0NM9aPKP6+5UsBWw5SveoCbz1Cnoqh8
qC1Mjap4Z3pa4CcvwXTh666T8lpRvTYnbG0P3G2cs0sUbg1TpXwWooDrHpPIaz8A
GfxGcuaKvnu/Op4BEKyspxYtDFjzNlwb1lsYoJTANWD2jGNo86xlNIL5kCO1bGCO
frcePLj6bQPS26eLqMzg8CbtqC+PBdMWjY/sbzCNpLDBXAW0HwTVl5h5clRZoC+N
OvBWG6xbUsIoR118Hg8MFGTZ+8O0OYolKGBeTGGWw17ZodG7Dqe8t4xTM/jLFTxH
dP74WQesPH1mrRYROmyezftQMWHMklmTVjAg==
ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=
messagingengine.com; h=mime-version:references:in-reply-to:from
:date:message-id:subject:to:content-type; s=fm1; t=1539323745;
bh=M68hW71u4Ar39fRg8gmr2C4RW5JdddpeLxytMc2BO08=; b=aluvXm4DHJxr
nFjbcnhhGX7kAd2dotvyVaTjkasA4aiwR+wn4cmGWV53NNiQnJaAlp6XPjAYYS+/
RDlrqKBqp3Ykl/X+HRNsy0U5nxws1PsMPnoFt6kP5po4Du1AbJUknjjqeXBIURGc
jKY1s8iRPlO6FTuc+/qTK/kpds/Lzubx4r3rzG1RvMkafF98v9RzHSGtWxEiwDPE
6TlakFbnZCNSSVDCHWHlJSGnPRj/dF3MrP4Sb/klELyLGy0XaneS/L+xuP6ngBuY
KykVPonO7jWqEfL8RYzf1IWxIxf6kIEaOvxElyf5B5WvKpFXVMH6EMaTc/TCjunP
oIXfbqMJOA==
ARC-Authentication-Results: i=1; mx5.messagingengine.com; arc=none (no signatures found);
dkim=pass (2048-bit rsa key sha256) header.d=gmail.com
[email protected] header.b=Ts1mssht header.a=rsa-sha256
header.s=20161025 x-bits=2048;
dmarc=pass policy.published-domain-policy=none
policy.published-subdomain-policy=quarantine
policy.applied-disposition=none policy.evaluated-disposition=none
(p=none,sp=quarantine,d=none,d.eval=none) header.from=gmail.com;
iprev=pass policy.iprev=209.85.167.47 (mail-lf1-f47.google.com);
spf=pass [email protected]
smtp.helo=mail-lf1-f47.google.com;
x-aligned-from=pass (Address match);
x-cm=none score=0;
x-google-dkim=pass (2048-bit rsa key) header.d=1e100.net
[email protected] header.b=rGRnejP8;
x-ptr=pass smtp.helo=mail-lf1-f47.google.com
policy.ptr=mail-lf1-f47.google.com;
x-return-mx=pass header.domain=gmail.com policy.is_org=yes
(MX Record found);
x-return-mx=pass smtp.domain=gmail.com policy.is_org=yes
(MX Record found);
x-tls=pass smtp.version=TLSv1.2 smtp.cipher=ECDHE-RSA-AES128-GCM-SHA256
smtp.bits=128/128;
x-vs=clean score=0 state=0
Authentication-Results: mx5.messagingengine.com;
arc=none (no signatures found);
dkim=pass (2048-bit rsa key sha256) header.d=gmail.com
[email protected] header.b=Ts1mssht header.a=rsa-sha256
header.s=20161025 x-bits=2048;
dmarc=pass policy.published-domain-policy=none
policy.published-subdomain-policy=quarantine
policy.applied-disposition=none policy.evaluated-disposition=none
(p=none,sp=quarantine,d=none,d.eval=none) header.from=gmail.com;
iprev=pass policy.iprev=209.85.167.47 (mail-lf1-f47.google.com);
spf=pass [email protected]
smtp.helo=mail-lf1-f47.google.com;
x-aligned-from=pass (Address match);
x-cm=none score=0;
x-google-dkim=pass (2048-bit rsa key) header.d=1e100.net
[email protected] header.b=rGRnejP8;
x-ptr=pass smtp.helo=mail-lf1-f47.google.com
policy.ptr=mail-lf1-f47.google.com;
x-return-mx=pass header.domain=gmail.com policy.is_org=yes
(MX Record found);
x-return-mx=pass smtp.domain=gmail.com policy.is_org=yes
(MX Record found);
x-tls=pass smtp.version=TLSv1.2 smtp.cipher=ECDHE-RSA-AES128-GCM-SHA256
smtp.bits=128/128;
x-vs=clean score=0 state=0
X-ME-VSSU: VW5zdWI9aHR0cDovL2hlYy1yYXMtaGVscC4xMDkxMTEyLm41Lm5hYmJsZS5jb20vdGVtcG
xhdGUvTmFtbFNlcnZsZXQuanRwP21hY3JvPXVuc3Vic2NyaWJlX2J5X2NvZGUmbm9kZT02
NDkyJmNvZGU9YW5Wc2FXRXVZMkZ1WTI5c1lVQm5iV0ZwYkM1amIyMThOalE1TW53dE1UQT
BNVGMyTlRJNU53PT0
X-ME-VSCause: gggruggvucftvghtrhhoucdtuddrgedtkedrudelgddutddtucdltddurdegtdejrddttd
dmucetufdoteggodetrfdotffvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdggtfgf
nhhsuhgsshgtrhhisggvnecuuegrihhlohhuthemuceftddtnecunecujfgurhepgghfjg
fhfffkuffvtgesrgdtreertddtjeenucfhrhhomheplfhulhhirgcuvegrnhgtohhlrgcu
oehjuhhlihgrrdgtrghntgholhgrsehgmhgrihhlrdgtohhmqeenucffohhmrghinhepnh
grsggslhgvrdgtohhmnecukfhppedvtdelrdekhedrudeijedrgeejnecurfgrrhgrmhep
ihhnvghtpedvtdelrdekhedrudeijedrgeejpdhhvghlohepmhgrihhlqdhlfhduqdhfge
ejrdhgohhoghhlvgdrtghomhdpmhgrihhlfhhrohhmpeeojhhulhhirgdrtggrnhgtohhl
rgesghhmrghilhdrtghomhequcfukfgkgfepjeeiieefnecuvehluhhsthgvrhfuihiivg
eptd
X-ME-VSCategory: clean
X-CM-Envelope: MS4wfOCFNdM0JdhwsOuCsCjOYJ/Zh+jkATLJOmrhl4TKaNDbYV09Pw0M7qzsGp0VIDzPT+GVO9B8ZyGvyx/2rtuC/lSYrkJpL1RvNzlMUvJW/wfx5n/Bv1+3
9kKA7plFjxoPyn8SBt4mdIyqV/o0TisMxvNNIMBaXb7odfliHwI1PHEmroRDwmqTeoTNOTK6zUIsUBopkytiZmUhsk0sDW6yIlsBTj0t0yRYz3PE86Y5Zvba
X-CM-Analysis: v=2.3 cv=KuKcJleN c=1 sm=1 tr=0 a=OjAXoK3CVIMGaZH8qBVlRA==:117
a=x7bEGLp0ZPQA:10 a=fFC8T-gT05AA:10 a=smKx5t2vBNcA:10 a=9I5xiGouAAAA:8
a=8yALVErd97-atHsjddsA:9 a=QEXdDO2ut3YA:10 a=5CR1VMvmZDYA:10
a=x2G-Z0Q4dF7hsxb_T4MA:9 a=V-XaETMbTM7pbu1C:21 a=ARFN2YZ7Uv8kHtb7LS-q:22
X-ME-CMScore: 0
X-ME-CMCategory: none
Received-SPF: pass
(gmail.com … _spf.google.com: Sender is authorized to use ‘[email protected]’ in ‘mfrom’ identity (mechanism ‘include:_netblocks.google.com’ matched))
receiver=mx5.messagingengine.com;
identity=mailfrom;
envelope-from=”[email protected]”;
helo=mail-lf1-f47.google.com;
client-ip=209.85.167.47
Received: from mail-lf1-f47.google.com (mail-lf1-f47.google.com [209.85.167.47])
(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))
(No client certificate requested)
by mx5.messagingengine.com (Postfix) with ESMTPS
for ; Fri, 12 Oct 2018 01:55:44 -0400 (EDT)
Received: by mail-lf1-f47.google.com with SMTP id m18-v6so8452658lfl.11
for ; Thu, 11 Oct 2018 22:55:44 -0700 (PDT)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
d=gmail.com; s=20161025;
h=mime-version:references:in-reply-to:from:date:message-id:subject:to;
bh=M68hW71u4Ar39fRg8gmr2C4RW5JdddpeLxytMc2BO08=;
b=Ts1msshtA0haEfIzSFRYuopgqCxDL2Nz+XzEAccFb8GfrJeo+x6895Y/Bl/ikBmTtG
tH8SrTsjf5q98a8EPL8VV0SENSjUxWkP3swWaKcvINS2nOzePkue8D+ijHl7JOt6K1L9
0sqeYHSXR8NZjGPKWyFFKFTAhwfBdqCo306YrYLAT4IcFgkWw8JugV9gzleJShDUMGOA
WGtwC4/LfT3I8ULAWRaYVWMVH2y9qdmsgd4P3DTy3IVCkYzASkQrIPrw6JznE4S0dswb
eJQrPA7AUwK6JE2Rfelv5+nI53eF8yifhm9FEACLdTExnl8x/0CC6AKwUAa0u1Fwui8o
K0uw==
X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
d=1e100.net; s=20161025;
h=x-gm-message-state:mime-version:references:in-reply-to:from:date
:message-id:subject:to;
bh=M68hW71u4Ar39fRg8gmr2C4RW5JdddpeLxytMc2BO08=;
b=rGRnejP8g15+4ZjNiiZ/2J9UIz+vQzbQfB3k53YNL24nXIBz2xlno108G8wyRppF5V
mYEZsJJUuXjmgWYyJ93htmOCKEG2OV6QyTQHql6FNVcbitJRQc3NIb6UsiGBbJYlEi4+
6bklKZFk7CKX5t54JL+etOT1gwfWBPfrvZ2GBFfHIBWkx14RVLJqF1HMgDejU5apo++r
tmepuxoe/EFjgpTwiZXdof4FTVjsxVU4jbRP1EXR+GuCaCu2ZbhyxaFE0kgBwEWfVMYO
hdj6oz2laWIO090EHArJAROvciRkIo5vChbCN8tPtiTECbJ/RWAaF0HsKnBVneSkm2s/
UI8w==
X-Gm-Message-State: ABuFfogAXS7KuWg3Talux5Kdvu/vHMpafkCXhBKIG6nu/WN0jE7jbT2V
Sd75lug+vcOOFJA0scuH/ur8mTgRp3h98/s4pRHtcA==
X-Google-Smtp-Source: ACcGV61voBzzSgj48GxEeZgR9CWswETHqIbI/9FMQKWzBLahnBUPWxDldDXAyHORJ2Dl7P8gfdkCIy8gvtwP62B92G0=
X-Received: by 2002:a19:7510:: with SMTP id y16-v6mr2834409lfe.100.1539323742241;
Thu, 11 Oct 2018 22:55:42 -0700 (PDT)
MIME-Version: 1.0
References: <[email protected]> <[email protected]>
In-Reply-To: <[email protected]>
From: Julia Cancola
Date: Fri, 12 Oct 2018 07:55:34 +0200
Message-ID:
Subject: Re: HEC RAS 2d BC critical depth
To: “Luis Partida [via HEC-RAS Help]”
Content-Type: multipart/alternative; boundary=”000000000000d9c860057801bc09″

–000000000000d9c860057801bc09
Content-Type: text/plain; charset=”UTF-8″
Content-Transfer-Encoding: quoted-printable

Sorry WEIR, it should be.

Thanks a lot for replying.

On Thu, 11 Oct 2018, 21:30 Luis Partida [via HEC-RAS Help], < [email protected]> wrote:

> You can do this a couple ways. You can set a normal depth to something
> artificially high (like 0.5) and the software will treat it as free
> outfall.
>
> The other option which is better but more tedious is to draw a 1d storage
> area at the downstream end of your model and connect it to the edge of yo=
ur
> 2D area. Give the storage area an artificially low elevation (if the
> outfall terrain is at 100-ft put your storage area a bottom elevation of
> 10-ft) and give it unlimited storage by typing 1000000000 or hold down ze=
ro
> until it stops. Set your connector to the exact elevation of the terrain
> and change the weir coefficient to 0.2 (VERY IMPORTANT). This also will b=
e
> treated as free outfall. I notice very odd results if i do not put my 1D
> storage elevation editor much much lower than the terrain, i usually do
> 1-200-ft below the terrain at the connection.
>
> Question: what do you mean a “wire”???
>
> ——————————
> If you reply to this email, your message will be added to the discussion
> below:
>
> http://hec-ras-help.1091112.n5.nabble.com/HEC-RAS-2d-BC-critical-depth-tp=
6492p6503.html
> To unsubscribe from HEC RAS 2d BC critical depth, click here
> <http://hec-ras-help.1091112.n5.nabble.com/template/NamlServlet.jtp?macro=
=3Dunsubscribe_by_code&node=3D6492&code=3DanVsaWEuY2FuY29sYUBnbWFpbC5jb218N=
jQ5MnwtMTA0MTc2NTI5Nw=3D=3D>
> .
> NAML
> <http://hec-ras-help.1091112.n5.nabble.com/template/NamlServlet.jtp?macro=
=3Dmacro_viewer&id=3Dinstant_html%21nabble%3Aemail.naml&base=3Dnabble.naml.=
namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.v=
iew.web.template.NodeNamespace&breadcrumbs=3Dnotify_subscribers%21nabble%3A=
email.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble=
%3Aemail.naml>
>

–000000000000d9c860057801bc09
Content-Type: text/html; charset=”UTF-8″
Content-Transfer-Encoding: quoted-printable

Sorry WEIR, it should be.=C2=A0

Thanks a lot for replying.=C2=A0

On Thu, 11=
Oct 2018, 21:30 Luis Partida [via HEC-RAS Help], <[email protected]>=
wrote:

ex;border-left:1px #ccc solid;padding-left:1ex">

You can do this a couple ways. You can set a normal depth to something art=
ificially high (like 0.5) and the software will treat it as free outfall.=
=20

The other option which is better but more tedious is to draw a 1d s=
torage area at the downstream end of your model and connect it to the edge =
of your 2D area. Give the storage area an artificially low elevation (if th=
e outfall terrain is at 100-ft =C2=A0put your storage area a bottom elevati=
on of 10-ft) and give it unlimited storage by typing 1000000000 or hold dow=
n zero until it stops. Set your connector to the exact elevation of the ter=
rain and change the weir coefficient to 0.2 (VERY IMPORTANT). This also wil=
l be treated as free outfall. I notice very odd results if i do not put my =
1D storage elevation editor much much lower than the terrain, i usually do =
1-200-ft below the terrain at the connection.

Question: what do you mean a "wire"???

=09
=09
=09

---

If you reply to this email, your message =
will be added to the discussion below:

http://hec-=
ras-help.1091112.n5.nabble.com/HEC-RAS-2d-BC-critical-depth-tp6492p6503.htm=
l

=09
To unsubscribe from HEC RAS 2d BC critical depth, click here.<= br>
NAML

–000000000000d9c860057801bc09–

[Author]

Posts