Welcome to the RAS Solution › Forums › HEC-RAS Help › unsteady_flow

  • This topic has 1 reply, 681 voices, and was last updated 12 years ago by Anonymous.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 22, 2014 at 2:33 pm #5450
    Anonymous
    Guest

    I have a problem with unsteady flow simulation results (upstream bound. c.: flow hydrograph, downstream bound. c.: normal depth). In cross section plot i can to display only Max WS (in animate i have only Max WS) but I want to display changes in stage during simulation and there is no option to do it.

    Computation Messages: Resetting post process profiles to end at: Max WS.

    Where is problem? I dont hane any idea how to fix it. thx a lot

    February 11, 2014 at 12:47 am #8719
    Chris G.
    Keymaster

    First make sure your model is running to completion without going unstable (make sure there are no “red” bars). Also, make sure your detailed output interval is small enough so that you have output profiles to look at.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.