Unsteady Flow Simulation: Only Max WS output profile - Kleinschmidt

This topic has 4 replies, 147 voices, and was last updated 4 years, 4 months ago by leclercq.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
July 17, 2020 at 12:52 pm #7717

leclercq
Participant

Hi, i have a very simple 1 reach hec ras model wits XS based on a terrain model.
Steady simulation runs without a problem.
However when i set up an unsteady simulation it only computes stage and flow for only the Max WS Profile.

The simulation consists of one flow hydrograph (1 hour time step for 24 hours)
downstream BC is normal depth set to 0.005

I have no idea what im doing wrong 🙂

the Comp. level output is

July 17, 2020 at 4:57 pm #12874

cameron
Participant

You need to change the hydrograph and detailed output interval

July 20, 2020 at 5:02 pm #12875

leclercq
Participant

i tried different combinations but it always ends at max ws

July 24, 2020 at 5:16 pm #12876

cameron
Participant

Can you share your files?

August 19, 2020 at 4:21 pm #12877

leclercq
Participant

hi sorry for the late reply, this is the model including the terrain. Thanks.

https://we.tl/t-rhRIBk05w8
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.