Welcome to the RAS Solution › Forums › HEC-RAS Help › Unsteady flow

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 16, 2014 at 8:06 pm #5528
    Robert
    Participant

    Hi

    In the project is occurred the problem, see appendix1. I used all stabiliy options, but this I cant solve.

    Do you have any ideas?

    Greetings!

    June 16, 2014 at 10:56 pm #8822
    jadams
    Participant

    I notice that the error occurs near where your slope begins to increase. Have you confirmed that you aren’t going supercritical.

    June 17, 2014 at 5:28 am #8824
    Anonymous
    Guest

    Is it possible to upload the Hec ras file?

    June 17, 2014 at 10:29 am #8825
    Robert
    Participant

    Hi Mike

    I’ m sorry, I can’t you send my project [.prj], but I can do you some printscreen. If will you want, so you write me.

    Greetings!

    June 17, 2014 at 10:58 am #8823
    Robert
    Participant

    Hi

    This is a subcritical flow, because Fr<1.0. What parameters I have to change?

    thank you very much
    Greetings!

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.