Rasmapper

[Anonymous]

Hi,

I ran a model and checked the results on cross section and Rasmapper. I noticed anything below water surface elevation is filled with water on Rasmapper even though there is no water crossing the banks. 1d show that the river capacity is enough and there is no flood over the banks. However, on rasmapper, model result shows water on surface if it is below thalveg.

I dont want Rasmapper to show water on the surface beyond the banks, if water is not crossing the banks.

How can I overcome this issue on Hecras 5.0.3?

Thank you.

[V]

Return-Path:
Received: from compute1.internal (compute1.nyi.internal [10.202.2.41])
by sloti25t09 (Cyrus fastmail-fmjessie44745-15359-git-fastmail-15359) with LMTPA;
Wed, 23 Aug 2017 10:56:19 -0400
X-Cyrus-Session-Id: sloti25t09-726047-1503500179-2-2928950159549777039
X-Sieve: CMU Sieve 3.0
X-Spam-known-sender: no
X-Spam-score: 0.0
X-Spam-hits: BAYES_00 -1.9, HTML_MESSAGE 0.001, RP_MATCHES_RCVD -0.001, SPF_PASS -0.001,
URI_HEX 1.122, LANGUAGES en, BAYES_USED global, SA_VERSION 3.4.0
X-Spam-source: IP=’207.194.62.167′, Host=’mail.nhcweb.com’, Country=’CA’,
FromHeader=’com’, MailFrom=’com’, XOriginatingCountry=’CA’
X-Spam-charsets: plain=’us-ascii’, html=’us-ascii’
X-Resolved-to: [email protected]
X-Delivered-to: [email protected]
X-Mail-from: [email protected]
Received: from mx2 ([10.202.2.201])
by compute1.internal (LMTPProxy); Wed, 23 Aug 2017 10:56:19 -0400
Received: from mx2.messagingengine.com (localhost [127.0.0.1])
by mailmx.nyi.internal (Postfix) with ESMTP id E203ED9052
for ; Wed, 23 Aug 2017 10:56:18 -0400 (EDT)
Received: from mx2.messagingengine.com (localhost [127.0.0.1])
by mx2.messagingengine.com (Authentication Milter) with ESMTP
id 895E6FB24C9;
Wed, 23 Aug 2017 10:56:18 -0400
Authentication-Results: mx2.messagingengine.com;
dkim=none (no signatures found);
dmarc=none (p=none) header.from=nhcweb.com;
spf=pass [email protected] smtp.helo=mail.nhcweb.com
Received-SPF: pass
(nhcweb.com: 207.194.62.167 is authorized to use ‘[email protected]’ in ‘mfrom’ identity (mechanism ‘ip4:207.194.62.167’ matched))
receiver=mx2.messagingengine.com;
identity=mailfrom;
envelope-from=”[email protected]”;
helo=mail.nhcweb.com;
client-ip=207.194.62.167
Received: from mail.nhcweb.com (mail.nhcweb.com [207.194.62.167])
(using TLSv1.2 with cipher ECDHE-RSA-AES256-SHA (256/256 bits))
(No client certificate requested)
by mx2.messagingengine.com (Postfix) with ESMTPS
for ; Wed, 23 Aug 2017 10:56:18 -0400 (EDT)
Received: from MSX-VAN.nhc.local (192.168.101.10) by MSX-VAN.nhc.local
(192.168.101.10) with Microsoft SMTP Server (TLS) id 15.0.1320.4; Wed, 23 Aug
2017 07:56:15 -0700
Received: from MSX-VAN.nhc.local ([fe80::9db1:b772:c990:8c1]) by
MSX-VAN.nhc.local ([fe80::9db1:b772:c990:8c1%18]) with mapi id
15.00.1320.000; Wed, 23 Aug 2017 07:56:15 -0700
From: Vanessa O’Connor
To: “Bora [via HEC-RAS Help]”
Subject: RE: Rasmapper
Thread-Topic: Rasmapper
Thread-Index: AQHTHB8ovUuToo/KCU6gKArE9umWDqKSB3cw
Date: Wed, 23 Aug 2017 14:56:14 +0000
Message-ID:
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-CA, en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-ms-exchange-transport-fromentityheader: Hosted
x-originating-ip: [70.55.244.56]
Content-Type: multipart/alternative;
boundary=”_000_b59fd3022a0e4ee1ba69470b2feeabc7MSXVANnhclocal_”
MIME-Version: 1.0

–_000_b59fd3022a0e4ee1ba69470b2feeabc7MSXVANnhclocal_
Content-Type: text/plain; charset=”us-ascii”
Content-Transfer-Encoding: quoted-printable

You need to add levee markers at the top of banks to confine the water to t=
he channel until the banks are overtopped.

From: Bora [via HEC-RAS Help] [mailto:[email protected]]
Sent: August 23, 2017 10:50 AM
To: Vanessa O’Connor
Subject: Rasmapper

Hi,

I ran a model and checked the results on cross section and Rasmapper. I not=
iced anything below water surface elevation is filled with water on Rasmapp=
er even though there is no water crossing the banks. 1d show that the river=
capacity is enough and there is no flood over the banks. However, on rasma=
pper, model result shows water on surface if it is below thalveg.

I dont want Rasmapper to show water on the surface beyond the banks, if wat=
er is not crossing the banks.

How can I overcome this issue on Hecras 5.0.3?

Thank you.
________________________________
If you reply to this email, your message will be added to the discussion be=
low:
http://hec-ras-help.1091112.n5.nabble.com/Rasmapper-tp4420.html
To start a new topic under HEC-RAS Help, email [email protected].c=
om
To unsubscribe from HEC-RAS Help, click here<http://hec-ras-help.1091112.n5=
.nabble.com/template/NamlServlet.jtp?macro=3Dunsubscribe_by_code&node=3D1&c=
ode=3Ddm9jb25ub3JAbmhjd2ViLmNvbXwxfDg3OTAzNzY3MA=3D=3D>.
NAML<http://hec-ras-help.1091112.n5.nabble.com/template/NamlServlet.jtp?mac=
ro=3Dmacro_viewer&id=3Dinstant_html%21nabble%3Aemail.naml&base=3Dnabble.nam=
l.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble=
.view.web.template.NodeNamespace&breadcrumbs=3Dnotify_subscribers%21nabble%=
3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabb=
le%3Aemail.naml>

–_000_b59fd3022a0e4ee1ba69470b2feeabc7MSXVANnhclocal_
Content-Type: text/html; charset=”us-ascii”
Content-Transfer-Encoding: quoted-printable

You=
need to add levee markers at the top of banks to confine the water to the =
channel until the banks are overtopped.

 

<= span lang=3D"EN-CA"> =

 

From: Bora [via HEC-RAS Help] [mailto:ml+=
[email protected]]

Sent: August 23, 2017 10:50 AM
To: Vanessa O’Connor <[email protected]>
Subject: Rasmapper

 

Hi,

I ran a model and checked the results on cross section and Rasmapper. I not=
iced anything below water surface elevation is filled with water on Rasmapp=
er even though there is no water crossing the banks. 1d show that the river=
capacity is enough and there is
no flood over the banks. However, on rasmapper, model result shows water o=
n surface if it is below thalveg.  

I dont want Rasmapper to show water on the surface beyond the banks, if wat=
er is not crossing the banks.

How can I overcome this issue on Hecras 5.0.3?

Thank you.

---

If you reply to this email, your mes=
sage will be added to the discussion below:

http://hec-ras-help.1091112.n5.nabble.=
com/Rasmapper-tp4420.html

To start a=
new topic under HEC-RAS Help, email
ml+s1091112n1h19@=
n5.nabble.com

To unsubscribe from HEC-RAS Help,
click here.
NAML

–_000_b59fd3022a0e4ee1ba69470b2feeabc7MSXVANnhclocal_–

[bora]

Hi,

I ran a model and there is no overtopping beyond the banks on cross sections. However, the rasmapper view shows water anything below WSE.

I dont want Rasmapper show water if the water is not going over the banks.

I added the levee markes too but still shows water in areas where there is njo flooding.

Below is a picutre. For example cross section 166.35 should show no water around on Rasmapper by looking at the result in corss section view.

I want to keep the long cross sections.

[Author]

Posts