Output Variables for Water Quality in VBA

[horace]

Hi Chris.G., I bought your book “Breaking the HEC-RAS Code”, I have found the 268 output variables in Appendix E, but it didn’t contain any water quality variables which I care most.

And from your book, I learnt that the Output_NodeOutput and Output_ReachOutput can also retrieve the 268 hydraulic variables, but without any water quality variables.

If I want to retreive my water quality variables, which HECRASController Class can I use? Or, is there any other way that I can retrieve the water quality variables from the water quality output files?

Thank you very much!

[Chris G.]

Horace-

Thanks for getting my book. Unfortunately, the HECRASController does not have any procedures that retrieve water quality output. And the water quality output is stored in a binary file (*.wq##), so it’s not readable/writable as a text file. I put in a request to HEC that they add this to the HECRASController for the 5.0.2 release. Cross your fingers.

Chris

[Jose Díaz]

Hello Chris,

I am in the same situation as Horace, is the 5.0.3 HecRASController now able to handle water quality data?

[Chris G.]

Return-Path: Received: from compute1.internal (compute1.nyi.internal [10.202.2.41])
by sloti25t09 (Cyrus fastmail-fmjessie44472-15312-git-fastmail-15312) with LMTPA;
Wed, 12 Jul 2017 11:38:15 -0400
X-Cyrus-Session-Id: sloti25t09-1376490-1499873895-2-4042420544672845074
X-Sieve: CMU Sieve 3.0
X-Spam-known-sender: no
X-Spam-score: 0.0
X-Spam-hits: BAYES_00 -1.9, FREEMAIL_FROM 0.001, HTML_MESSAGE 0.001,
RCVD_IN_DNSWL_NONE -0.0001, RCVD_IN_MSPIKE_H3 -0.01,
RCVD_IN_MSPIKE_WL -0.01, SPF_PASS -0.001, URI_HEX 1.122, LANGUAGES en,
BAYES_USED global, SA_VERSION 3.4.0
X-Spam-source: IP=’209.85.217.170′, Host=’mail-ua0-f170.google.com’, Country=’US’,
FromHeader=’com’, MailFrom=’com’
X-Spam-charsets: to=’UTF-8′, plain=’UTF-8′, html=’UTF-8′
X-Resolved-to: [email protected]
X-Delivered-to: [email protected]
X-Mail-from: [email protected]
Received: from mx4 ([10.202.2.203])
by compute1.internal (LMTPProxy); Wed, 12 Jul 2017 11:38:15 -0400
Received: from mx4.messagingengine.com (localhost [127.0.0.1])
by mailmx.nyi.internal (Postfix) with ESMTP id 1400AC8547
for ; Wed, 12 Jul 2017 11:38:15 -0400 (EDT)
Received: from mx4.messagingengine.com (localhost [127.0.0.1])
by mx4.messagingengine.com (Authentication Milter) with ESMTP
id E67116435F4;
Wed, 12 Jul 2017 11:38:15 -0400
Authentication-Results: mx4.messagingengine.com;
dkim=pass (2048-bit rsa key) header.d=gmail.com [email protected] header.b=ppujFgKq;
dmarc=pass header.from=gmail.com;
spf=pass [email protected] smtp.helo=mail-ua0-f170.google.com;
x-google-dkim=pass (2048-bit rsa key) header.d=1e100.net [email protected] header.b=G6KFJayR
Received-SPF: pass
(gmail.com … _spf.google.com: Sender is authorized to use ‘[email protected]’ in ‘mfrom’ identity (mechanism ‘include:_netblocks.google.com’ matched))
receiver=mx4.messagingengine.com;
identity=mailfrom;
envelope-from=”[email protected]”;
helo=mail-ua0-f170.google.com;
client-ip=209.85.217.170
Received: from mail-ua0-f170.google.com (mail-ua0-f170.google.com [209.85.217.170])
(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))
(No client certificate requested)
by mx4.messagingengine.com (Postfix) with ESMTPS
for ; Wed, 12 Jul 2017 11:38:14 -0400 (EDT)
Received: by mail-ua0-f170.google.com with SMTP id g40so16774256uaa.3
for ; Wed, 12 Jul 2017 08:38:14 -0700 (PDT)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
d=gmail.com; s=20161025;
h=mime-version:in-reply-to:references:from:date:message-id:subject:to;
bh=pIiv7fXzq4peO+8BNKlGQ2pUpqtGBns7TgyuiWAHF5M=;
b=ppujFgKqw4vdQnaTDkc3WwretQ1SrRmgTCE1VH7mVkuBZWZoVGJe0N2UFJ2aXLJ14o
P10ApBBq5Byc+nmo0ZzVOz03L6miCmfJqfbDPU9yRnHYIy9xfPv7NeeyQX4b2vb+opzv
cItQdFqrW/LsrGOhAodXXhvULjZnfBSckYHdyKa2GT7otWeN6Mt6gPYgr293KeMkdFTD
fztlY9uFYxCg3tXZsa3gYh5gImFTW2qzAzaoZkeLFStKEHqUErsniqrRST7XYlrZVfma
rtynie0wjHcU5Xvcb1HfJGYkAwNzay8d23lwJqzmfvNa0Z02rh8KvbA4MYLqak1Gi+rN
P/Cw==
X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
d=1e100.net; s=20161025;
h=x-gm-message-state:mime-version:in-reply-to:references:from:date
:message-id:subject:to;
bh=pIiv7fXzq4peO+8BNKlGQ2pUpqtGBns7TgyuiWAHF5M=;
b=G6KFJayRW8ehNfeW3x5ZyopF3Wn06a0WgD6aDl1vYdZVTuIVVCiymfoUUl47KHzoVp
8bnU/QvoinFBDzGreLLzNd9ozA+xcYVB2s/PLZeKyswc1uGumqMs+P5at6z6r0vvhdj2
kLItPc80CgWpTQv0X0rs1FJbfi7+lGEtLkLwjfaBKGHKHSPQZguZ7nT64rW3CLpD+lFJ
ECoc3BU/3cJGaBVNnlFj3MQRyb8NgWsEBess2sB47rHoJucugyp9b2OPT/gOeye2TLGc
jq8M+I3s5UCN2M5teFQI3KMhgnKoAc80eeAhx7c6vnFsjF7A4tlhTtPKFVNhHx/M1aTq
qZfA==
X-Gm-Message-State: AIVw112KyMs/o/eu3aYM+Enyk/hEyIUvCOmSgNVnB0pRqrW5IgGgE+cx
ycdD0lFbtIx/6wbkDJa/5lUeRGvJQd3u
X-Received: by 10.159.36.215 with SMTP id 81mr3685508uar.48.1499873893189;
Wed, 12 Jul 2017 08:38:13 -0700 (PDT)
MIME-Version: 1.0
Received: by 10.176.80.162 with HTTP; Wed, 12 Jul 2017 08:38:12 -0700 (PDT)
In-Reply-To: <[email protected]>
References: <[email protected]> <[email protected]>
<[email protected]>
From: Chris Goodell Date: Wed, 12 Jul 2017 08:38:12 -0700
Message-ID:
Subject: Re: Output Variables for Water Quality in VBA
To: =?UTF-8?B?Sm9zw6kgRMOtYXogW3ZpYSBIRUMtUkFTIEhlbHBd?=
Content-Type: multipart/alternative; boundary=”001a113e15c89c8ec90554209a46″

–001a113e15c89c8ec90554209a46
Content-Type: text/plain; charset=”UTF-8″
Content-Transfer-Encoding: quoted-printable

Jose-

Sorry, but HEC has not included water quality output extraction in the
HECRASController for Version 5.0.3.

Chris

On Tue, Jul 11, 2017 at 8:02 AM, Jos=C3=A9 D=C3=ADaz [via HEC-RAS Help] < [email protected]> wrote:

> Hello Chris,
>
> I am in the same question as Horace, is the 5.0.3 HecRASController now
> able to handle water quality data?
>
> ——————————
> If you reply to this email, your message will be added to the discussion
> below:
> http://hec-ras-help.1091112.n5.nabble.com/Output-
> Variables-for-Water-Quality-in-VBA-tp2913p4189.html
> To start a new topic under HECRAS Controller, email
> [email protected]
> To unsubscribe from HECRAS Controller, click here
> <http://hec-ras-help.1091112.n5.nabble.com/template/NamlServlet.jtp?macro=
=3Dunsubscribe_by_code&node=3D1184&code=3DdGhlcmFzc29sdXRpb25AZ21haWwuY29tf=
DExODR8MTE3NDg5NDgxNQ=3D=3D>
> .
> NAML
> <http://hec-ras-help.1091112.n5.nabble.com/template/NamlServlet.jtp?macro=
=3Dmacro_viewer&id=3Dinstant_html%21nabble%3Aemail.naml&base=3Dnabble.naml.=
namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.n=
aml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabb=
le.view.web.template.NodeNamespace&breadcrumbs=3Dnotify_subscribers%21nabbl=
e%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21na=
bble%3Aemail.naml>
>

–001a113e15c89c8ec90554209a46
Content-Type: text/html; charset=”UTF-8″
Content-Transfer-Encoding: quoted-printable

Jose-

Sorry, but HEC has not included w=
ater quality output extraction in the HECRASController for Version 5.0.3. =
=C2=A0

Chris

On Tue, Jul 11, 2017 at 8:02 AM, Jos=C3=A9 =
D=C3=ADaz [via HEC-RAS Help] <[email protected]=
e.com> wrote:

argin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">

Hello Chris,

I am in =C2=A0the same question as Horace, is the 5.0.3 HecRASContr=
oller now able to handle water quality data?

=09
=09
=09

---

If you reply to this email, your message =
will be added to the discussion below:

http://hec=
-ras-help.1091112.n5.nabble.com/Output-Variables-for-Water-Qualit=
y-in-VBA-tp2913p4189.html

To start a new topic under HECRAS Controller, email ml+s1091112n1184h88@n5.=
nabble.com

To unsubscribe from HECRAS Controller, click here.
NAML

–001a113e15c89c8ec90554209a46–

[Jose Díaz]

Hi Chris,

Thank you for your time on this. In the meantime I had to go old school and extract the variables copy-pasting them to excel and coding a macro to organize the info….I hope someday HEC-team makes this available!

José D.

[Author]

Posts