HELP error hec ras

[Anonymous]

Hi, I have the same problem, I have tried everything possible bu tnothing run right, could you please let me explain excatly what I have to do to solve this problem. thank you
Andrea

[Anonymous]

Yes. The problem is that you are none a US citizen. So, go to your control panel and change the : Region and Language to : English US.
Mine was Greek and i had the same problem.
Hope it is ok!!

[Anonymous]

Thank you for the answer, I’ve done it in all the way but nothing is solved, I changed the region in US and set the keyboard language ad US english, but the error is still present, what can I do?

[Anonymous]

You have to go to the control panel – Time, Language and Region and to change everything to US (Time Zone, Language, Region, Language for none Unicode programs) Everything to US – English.
Then you run your program again. Do you use the last version 5.0.3 ?

[Anonymous]

By deleting .hdf file and .blf file from your containing folder the problem can be solved.My project was run after I had deleted the .hdf and .blf files.

[Anonymous]

Tengo el mismo error he intentado lo de cambiar en el panel de control el idioma estados unidos pero no me corre, tu como hiciste

[Anonymous]

puedes cambiarlo en panel de control — reloj idioma region — región– cambiar ubicación –ubicación — estados unidos

[Leo]

I was running a dam breach simulation and had the following error at the very end of the simulation and was not allowing to save the results:

Unsteady flow encountered an error.

HDF5-DIAG: Error detected in HDF5 (1.8.11) thread 0:
#000: ..\..\src\H5Dio.c line 234 in H5Dwrite(): can’t prepare for writing data

1D Post Process Skipped (simulation is all 2D)

The problem was originated on the 2D flow area. It was basically due to the Tailwater Connection of the Dam Breach to the 2D flow area having elevations higher than the elevation of the bottom of the breach. In other words, the final bottom elevation of the breach was below the terrain elevation in a few locations.
To solve this issue, I reduced the length of the connection 2D Flow Area/Dam by moving points on the 2D Flow Area and checked that all points at this connection were below the final breach bottom elevation.
Hope this helps!

[Monte]

I am facing the same issue but unable to get the problem solved don know where I m doing mistake

[Anonymous]

Buenas. A mi me pasó igual. Se corrigió poniendo Noviembre en las fechas del hidrograma y simulación.

[Anonymous]

Change to september and fix problem
Thank you
Martin

[Anonymous]

Solved after looking all these answers.

Just change the region to English (US), close your project in HEC-RAS, open it again, and it should work just fine.

[ahmed]

Return-Path:
Received: from compute1.internal (compute1.nyi.internal [10.202.2.41])
by sloti1d2t14 (Cyrus 3.1.7-802-g7a41c81-fmstable-20200203v1) with LMTPA;
Thu, 13 Feb 2020 01:53:05 -0500
X-Cyrus-Session-Id: sloti1d2t14-1581576785-4102794-2-4370553389831313885
X-Sieve: CMU Sieve 3.0
X-Spam-known-sender: no
X-Spam-sender-reputation: 500 (none)
X-Spam-score: 0.3
X-Spam-hits: FREEMAIL_ENVFROM_END_DIGIT 0.25, FREEMAIL_FROM 0.001, HTML_MESSAGE 0.001,
ME_SENDERREP_NEUTRAL 0.001, RCVD_IN_DNSWL_NONE -0.0001,
RCVD_IN_MSPIKE_H3 0.001, RCVD_IN_MSPIKE_WL 0.001, SPF_HELO_NONE 0.001,
SPF_PASS -0.001, URI_HEX 0.1, LANGUAGES en, BAYES_USED none,
SA_VERSION 3.4.2
X-Spam-source: IP=’209.85.210.48′, Host=’mail-ot1-f48.google.com’, Country=’US’,
FromHeader=’com’, MailFrom=’com’
X-Spam-charsets: plain=’UTF-8′, html=’UTF-8′
X-Resolved-to: [email protected]
X-Delivered-to: [email protected]
X-Mail-from: [email protected]
Received: from mx4 ([10.202.2.203])
by compute1.internal (LMTPProxy); Thu, 13 Feb 2020 01:53:05 -0500
Received: from mx4.messagingengine.com (localhost [127.0.0.1])
by mailmx.nyi.internal (Postfix) with ESMTP id 5015D1CE0145
for ; Thu, 13 Feb 2020 01:53:05 -0500 (EST)
Received: from mx4.messagingengine.com (localhost [127.0.0.1])
by mx4.messagingengine.com (Authentication Milter) with ESMTP
id 6E9B630A72D;
Thu, 13 Feb 2020 01:53:05 -0500
ARC-Seal: i=1; a=rsa-sha256; cv=none; d=messagingengine.com; s=fm2; t=
1581576785; b=QwjypB7/E2PNybGxBPvenxbD0aBkwrVMEccvX/IGxi66P1YQ2b
ewMiKjJg2vWjn0n1Dr61SQYAnHb4bLdyBnlKFrN0BwVAkN76zo4SP+IpI0Fo8xNd
QcfEKF7CXCiBvoXnM0KHKxeZ3ZDrBDe8kFV1WrcU3ZPOau+mFrPGjs83dgzPFEWm
NyifgZiW9aSnBOi0xTe5f8AfnmZyHOTzj4LpWG+X29XdpFAzS4AR57tAX8kvBEwg
CNTbzs30AzY8dJ0R8tEBkv0ayd2vjYejD9jUBPUtIx2Nw9QmHeJsCbI//o9uPAa3
hOLsLxw7keyhZAveZnACiV4X9A4t4wcj4tvA==
ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=
messagingengine.com; h=mime-version:references:in-reply-to:from
:date:message-id:subject:to:content-type; s=fm2; t=1581576785;
bh=qE+XSR6+eRhKV4rsRTVlVLKZnq1pJUMW4mZ2/45pfn8=; b=wVk6NCVr6i48
lhTaCjo4hqbZ8tZQNvM98q4v42oxFtju4u4KIaeKhJ17zZxRprWHlpzaGJ6jhAZC
amBCgbe3UsMq7lDSzXraGe8C7SFMfarcPxMbdEOKxA9qLL1MIY971Qp3NVWw0U2I
Gehu2jlUwkFXv2v46lCFPVSNDhq+SzJwI6moT8doWNQs45Q8Svvl/h+FyOsB3Djf
RjZGdSa76r1GKbSj9faZFE048u7Snetfi4fHUPShDYysMZOxxj2JmGBarQYMDJjj
lS4PfEzVtz1sp4HHJJY1W/zO0FOMwFEAOd5U7HkA2HuA8DVth/Ex4YI9r2rgzu1P
oJbTEf+18A==
ARC-Authentication-Results: i=1; mx4.messagingengine.com; arc=none (no signatures found);
bimi=none (Domain is not BIMI enabled);
dkim=pass (2048-bit rsa key sha256) header.d=gmail.com
[email protected] header.b=FqffRson header.a=rsa-sha256
header.s=20161025 x-bits=2048;
dmarc=pass policy.published-domain-policy=none
policy.published-subdomain-policy=quarantine
policy.applied-disposition=none policy.evaluated-disposition=none
(p=none,sp=quarantine,d=none,d.eval=none) policy.policy-from=p
header.from=gmail.com;
iprev=pass smtp.remote-ip=209.85.210.48 (mail-ot1-f48.google.com);
spf=pass [email protected]
smtp.helo=mail-ot1-f48.google.com;
x-aligned-from=pass (Address match);
x-google-dkim=pass (2048-bit rsa key) header.d=1e100.net
[email protected] header.b=nb9OQSCc;
x-ptr=pass smtp.helo=mail-ot1-f48.google.com
policy.ptr=mail-ot1-f48.google.com;
x-return-mx=pass header.domain=gmail.com policy.is_org=yes
(MX Records found: alt4.gmail-smtp-in.l.google.com,alt2.gmail-smtp-in.l.google.com,alt1.gmail-smtp-in.l.google.com,gmail-smtp-in.l.google.com,alt3.gmail-smtp-in.l.google.com);
x-return-mx=pass smtp.domain=gmail.com policy.is_org=yes
(MX Records found: alt4.gmail-smtp-in.l.google.com,alt2.gmail-smtp-in.l.google.com,alt1.gmail-smtp-in.l.google.com,gmail-smtp-in.l.google.com,alt3.gmail-smtp-in.l.google.com);
x-tls=pass smtp.version=TLSv1.2 smtp.cipher=ECDHE-RSA-AES128-GCM-SHA256
smtp.bits=128/128;
x-vs=clean score=0 state=0
Authentication-Results: mx4.messagingengine.com;
arc=none (no signatures found);
bimi=none (Domain is not BIMI enabled);
dkim=pass (2048-bit rsa key sha256) header.d=gmail.com
[email protected] header.b=FqffRson header.a=rsa-sha256
header.s=20161025 x-bits=2048;
dmarc=pass policy.published-domain-policy=none
policy.published-subdomain-policy=quarantine
policy.applied-disposition=none policy.evaluated-disposition=none
(p=none,sp=quarantine,d=none,d.eval=none) policy.policy-from=p
header.from=gmail.com;
iprev=pass smtp.remote-ip=209.85.210.48 (mail-ot1-f48.google.com);
spf=pass [email protected]
smtp.helo=mail-ot1-f48.google.com;
x-aligned-from=pass (Address match);
x-google-dkim=pass (2048-bit rsa key) header.d=1e100.net
[email protected] header.b=nb9OQSCc;
x-ptr=pass smtp.helo=mail-ot1-f48.google.com
policy.ptr=mail-ot1-f48.google.com;
x-return-mx=pass header.domain=gmail.com policy.is_org=yes
(MX Records found: alt4.gmail-smtp-in.l.google.com,alt2.gmail-smtp-in.l.google.com,alt1.gmail-smtp-in.l.google.com,gmail-smtp-in.l.google.com,alt3.gmail-smtp-in.l.google.com);
x-return-mx=pass smtp.domain=gmail.com policy.is_org=yes
(MX Records found: alt4.gmail-smtp-in.l.google.com,alt2.gmail-smtp-in.l.google.com,alt1.gmail-smtp-in.l.google.com,gmail-smtp-in.l.google.com,alt3.gmail-smtp-in.l.google.com);
x-tls=pass smtp.version=TLSv1.2 smtp.cipher=ECDHE-RSA-AES128-GCM-SHA256
smtp.bits=128/128;
x-vs=clean score=0 state=0
X-ME-VSSU: VW5zdWI9aHR0cDovL2hlYy1yYXMtaGVscC4xMDkxMTEyLm41Lm5hYmJsZS5jb20vdGVtcG
xhdGUvTmFtbFNlcnZsZXQuanRwP21hY3JvPXVuc3Vic2NyaWJlX2J5X2NvZGUmbm9kZT0y
Mzg3JmNvZGU9WVM1a1lXWmhiR3hoTVROQVoyMWhhV3d1WTI5dGZESXpPRGQ4TmprNU5EUX
lPRFl4
X-ME-VSCause: gggruggvucftvghtrhhoucdtuddrgedugedrieejgddutdefucetufdoteggodetrfdotf
fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdggtfgfnhhsuhgsshgtrhhisggvpdfu
rfetoffkrfgpnffqhgenuceurghilhhouhhtmecufedttdenucenucfjughrpeggfhgjhf
ffkffuvfgtsegrtderredttdejnecuhfhrohhmpeethhhmvgguucffrghfrghllhgruceo
rgdruggrfhgrlhhlrgdufeesghhmrghilhdrtghomheqnecuffhomhgrihhnpehnrggssg
hlvgdrtghomhenucfkphepvddtledrkeehrddvuddtrdegkeenucevlhhushhtvghrufhi
iigvpedtnecurfgrrhgrmhepihhnvghtpedvtdelrdekhedrvddutddrgeekpdhhvghloh
epmhgrihhlqdhothduqdhfgeekrdhgohhoghhlvgdrtghomhdpmhgrihhlfhhrohhmpeeo
rgdruggrfhgrlhhlrgdufeesghhmrghilhdrtghomhequcfukfgkgfepieehkedu
X-ME-VSScore: 0
X-ME-VSCategory: clean
Received-SPF: pass
(gmail.com … _spf.google.com: Sender is authorized to use ‘[email protected]’ in ‘mfrom’ identity (mechanism ‘include:_netblocks.google.com’ matched))
receiver=mx4.messagingengine.com;
identity=mailfrom;
envelope-from=”[email protected]”;
helo=mail-ot1-f48.google.com;
client-ip=209.85.210.48
Received: from mail-ot1-f48.google.com (mail-ot1-f48.google.com [209.85.210.48])
(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))
(No client certificate requested)
by mx4.messagingengine.com (Postfix) with ESMTPS
for ; Thu, 13 Feb 2020 01:53:05 -0500 (EST)
Received: by mail-ot1-f48.google.com with SMTP id r27so4561041otc.8
for ; Wed, 12 Feb 2020 22:53:05 -0800 (PST)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
d=gmail.com; s=20161025;
h=mime-version:references:in-reply-to:from:date:message-id:subject:to;
bh=qE+XSR6+eRhKV4rsRTVlVLKZnq1pJUMW4mZ2/45pfn8=;
b=FqffRsoneAfWyqdVzTG9H8emWh8gstGQKDtLCYerfq/wIAMLtQVuE0ZFMqcBGm9Jn4
MduzxTGIWw3PubIjiAAKtGGqP9hAqwFOzrJxziOGkYzGI3aWWzHxvVBHacAAsyXlRDLW
94XX8+bPL/ybwJMb8h7+tOdjb4Pa1TuLpySvxCS4IQgQO8Nij+c6u0oT9zISpkJiNofq
vgLTEzp2C5cMUAKoFTniv7JUNnNPD0oXwAq29ErgDyDuKNQ51mBu2A/ddWpDOaSHeIS/
P0X5BUJg/0uHvbiak3ufMCXrBT4o7E5DE1hMhO81w0ZFQIJ/7MoRjmPijrUNZGOKkSbN
BcfA==
X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
d=1e100.net; s=20161025;
h=x-gm-message-state:mime-version:references:in-reply-to:from:date
:message-id:subject:to;
bh=qE+XSR6+eRhKV4rsRTVlVLKZnq1pJUMW4mZ2/45pfn8=;
b=nb9OQSCcfMSY5wFh5B6bD5vsBHRLw3UG9Yk1b6I2dN9qxXH/tBYgeiyVyyByBaPkYZ
pUZMH3GAzyCyx1str4/F1IseKPkxHDPilQgbr3gbmQAKtWLisWe4T30zToo+JLk6ieAE
u8ROCe4fJP7FMfAuAZaeWOqBLJZKf8CGy0fMsJoyQXoniKbI3SiluO2vBl4/wZtRuUWk
fHyCeDYRQe3hYqnMU5g/F7Yi8axJ7+jGMMvey8MOzPzQCMtrFciClAw9IkN9TipKTpgn
cJYMCmrS8s3Khg3WJWcAn0iVTmhCTH+035E5aaf+q5thVi8005Bi9u0/oUhyTCc7kBI/
f3lg==
X-Gm-Message-State: APjAAAVjzdmSXMudZhJlh/e0mk0IwJ2f9CRmRqIJbBk7IIAl2ElABTIH
zAmCha/uEp518mKdVdxfwFxaZGc5TRrGLpNeTec6pxDo
X-Google-Smtp-Source: APXvYqzBcNtVPJPHnyL20F2xr7Yx1mThxh7YLcpGRBZ1gB3VFVOr/s3IpR5VUVmUI3kGRPjY57I056/pCpnSdgCl+Xs=
X-Received: by 2002:a05:6830:1d91:: with SMTP id y17mr11596646oti.276.1581576783336;
Wed, 12 Feb 2020 22:53:03 -0800 (PST)
MIME-Version: 1.0
References: <[email protected]> <[email protected]>
<[email protected]> <[email protected]>
<[email protected]> <[email protected]>
<[email protected]> <[email protected]>
<[email protected]>
In-Reply-To: <[email protected]>
From: Ahmed Dafalla
Date: Thu, 13 Feb 2020 08:55:32 +0200
Message-ID:
Subject: Re: HELP error hec ras
To: “Omar [via HEC-RAS Help]”
Content-Type: multipart/alternative; boundary=”0000000000005b167e059e6f8a6e”

–0000000000005b167e059e6f8a6e
Content-Type: text/plain; charset=”UTF-8″
Content-Transfer-Encoding: quoted-printable

thanks a lot

On Wed, Feb 12, 2020 at 11:45 PM Omar [via HEC-RAS Help] < [email protected]> wrote:

> Solved after looking all these answers.
>
> Just change the region to English (US), close your project in HEC-RAS,
> open it again, and it should work just fine.
>
> ——————————
> If you reply to this email, your message will be added to the discussion
> below:
>
> http://hec-ras-help.1091112.n5.nabble.com/HELP-error-hec-ras-tp2387p8590.=
html
> To unsubscribe from HELP error hec ras, click here
> <http://hec-ras-help.1091112.n5.nabble.com/template/NamlServlet.jtp?macro=
=3Dunsubscribe_by_code&node=3D2387&code=3DYS5kYWZhbGxhMTNAZ21haWwuY29tfDIzO=
Dd8Njk5NDQyODYx>
> .
> NAML
> <http://hec-ras-help.1091112.n5.nabble.com/template/NamlServlet.jtp?macro=
=3Dmacro_viewer&id=3Dinstant_html%21nabble%3Aemail.naml&base=3Dnabble.naml.=
namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.n=
aml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabb=
le.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-=
nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamesp=
ace-nabble.view.web.template.NodeNamespace&breadcrumbs=3Dnotify_subscribers=
%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_em=
ail%21nabble%3Aemail.naml>
>

–0000000000005b167e059e6f8a6e
Content-Type: text/html; charset=”UTF-8″
Content-Transfer-Encoding: quoted-printable

thanks a lot

On Wed, Feb 12, 2020 at 11:45 PM Omar [via=
HEC-RAS Help] <m=
[email protected]> wrote:

=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-left:1px solid rg= b(204,204,204);padding-left:1ex">

Solved after looking all these answers.

Just change the region to English (US), close your project in HEC-R=
AS, open it again, and it should work just fine.

=09
=09
=09

---

If you reply to this email, your message =
will be added to the discussion below:

http://hec-ras-help.1091112.n5.nabble.co=
m/HELP-error-hec-ras-tp2387p8590.html

=09
To unsubscribe from HELP error hec ras, click here.
NAML

–0000000000005b167e059e6f8a6e–

[Anonymous]

HDF5-DIAG: Error detected in HDF5 (1.8.11) thread 0:
HDF_ERROR trying to use HDF output file
Subroutine HDF_OPEN_TIME
#000: ..\..\src\H5Pdcpl.c line 869 in H5Pset_chunk(): all chunk dimensions must be less than 2^32

[Anonymous]

ante este error a mi me resulto lo siguiente
En la estructura lateral elimine una culvert
Entonces era algo mal en los data de una culvert

[Author]

Posts