Welcome to the RAS Solution › Forums › HEC-RAS Help › Cut from terrain_cross section

Viewing 1 post (of 1 total)
  • Author
    Posts
  • January 23, 2018 at 9:35 pm #6763
    francesca.calligola
    Participant

    Hi all,
    I have a question related to the use of the “Cut from terrain” command”.
    I would like to know if it is possible to avoid the software to automatically set the length of the cross section once the station and elevation values are obtained using the command “Cut from terrain”.

    Thanks

  • Author
    Posts
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.