Bridge steady state

[Anonymous]

Hello,

We were trying to do steady state analysis of a river. We tried adding a bridge across a cross section of the river. We wanted to check the results of water elevations near the bridge and compare it with surveyed water elevation results. Can you guide us giving us an overall procedure to do this or refer us some documents. We also had problems viewing the final results.

Thanks in advance,
Deepa

[Anonymous]

If you are new to using HEC-RAS, you might check out the Application Guide which has step-by-step walk through examples including at least one bridge.

It should be available under the Help menu, if not, you could probably find it by going to the HEC-RAS web page, which is also available under help.

[Author]

Posts